There are two ways to install the monitor privacy screen, one is the strip installation, and the other is the tower buckle installation.

　　1.The strip installation

Remove the strip from the release paper	Place the strip near the edge of the peep-proof film, center it vertically, fix the bottom end of the strip, and stick the strip on the left side of the peep-proof film.	Stable pressure along the strip, extrusion bubble
Remove the protective layer of the strip, leave the strip on the peep-proof film, and apply the strip to the right side of the peep-proof film.	Attach the anti-spy film to the display from the bottom and apply pressure along the adhesive to ensure a firm paste.	For larger size anti-spy film, 5 strips can be installed

Note: To remove or reposition the privacy film, slowly remove the anti-spy film from the display. After testing, if the paste is kept clean, the anti-spy film can be reused hundreds of times. To update the adhesive on the anti-spy film, rinse it with running warm water and gently rub the glue with your fingers to remove debris. Gently blow the anti-peep film to dry it. Small parts to avoid contact with children.

　　2.Tower buckle installation method

Remove the transparent plastic buckle and separate.	Peel the kraft protective layer behind the transparent buckle	Attach the plastic buckle to the edge of the computer screen as shown
		Note: small parts to avoid child contact
Insert the optical anti-spy film into the transparent buckle